| Parameter |
Unit |
CK 7625 |
| GENERAL CAPACITY |
|
|
| Max. swing diam. over bed |
mm |
250 |
| Max. swing diam. over drag board |
mm |
90 |
| Max. diam. of through-hole Hydraulic chuck |
mm |
40 |
| Max. diam. of through-hole Collet |
mm |
40 |
| Thread processing range |
mm |
0.25~80 |
| |
thread/inch |
3~80 |
| Chuch size |
inch |
6" |
| Spindle speed |
rpm |
300~3500 |
| Main motor power |
kw |
4 |
| X/Y AXIS |
|
|
| Travel X-Axis |
mm |
380 |
| Travel Z-Axis |
mm |
400 |
| Max. travel speed (servo) X-Axis |
mm/min |
8000 |
| Max. travel speed (servo) Z-Axis |
mm/min |
10000 |
| Drive motor torque (servo) X-Axis & Z-Axis |
Nm |
6 |
| TURRET |
|
|
| Type of turret |
|
Tool post |
| No. of station |
nos |
4--7 |
| Tool cross section |
mm |
20x20 |
| ACCURACY |
|
|
| Vertical spindle vibration |
mm |
0.010 |
| Horizontal spindle vibration |
mm |
0.010 |
| Positioning of axes X-Axis |
mm |
0.016 |
| Positioning of axes Z-Axis |
mm |
0.020 |
| Repeatability of axes X-Axis |
mm |
0.007 |
| Repeatability of axes Y-Axis |
mm |
0.008 |
| Min.setup unit |
mm |
0.001 |
| HYDRAULIC SYSTEM(OPTIONAL) |
|
|
| Nominal pressure |
MPa |
3.5 |
| Capacity |
ltr |
50 |
| Hydraulic oil pump motor power |
kw |
0.75 |
| TAILSTOCK |
|
|
| Lubricating oil pump motor power(optional) |
w |
40 |
| Cooling pump motor power |
kw |
0.75 |
| MACHINE DIMENTION |
|
|
| Overall dimension (LxWxH) |
mm |
2050x1150x1650 |
| Net weight (Approx) |
kg |
1850 |
| STANDARD CONFIGURATION |
|
|
| Clamping: Hydraulic collet |
|
|
| Limit switch |
|
|
| Reset switch |
|
|
| Water Collect |
|
|
| Automatic lubrication |
|
|
| Fans |
|
|
| Lighting device |
|
|
| Indicator light |
|
|
| Assorted tools and User Guide |
|
|
| OPTIONAL CONFIGURATION |
|
|
| Hydraulic chuck |
|
|
| Automatic manipulator |
|
|
| Parts loader |
|
|
| Automatic chip cleaner |
|
|
| |
|
|
))
