| Worktable |
| Worktable Size: 1100 x 600
mm, 1270 x 600 mm |
T Slot (number of slot x slot
width x distance between slots): 18 x 5 x 100 mm, 18 x
5 x 100 mm
|
Max. Worktable Load: 600 kgs,
700 kgs
|
| Travel |
| X Axis: 1000 mm, 1100 mm |
| X Axis: 1000 mm, 1100 mm |
| Z Axis: 600 mm, 610 mm Spindle
Nose to Table: 90~690 mm, 120~730 mm |
| Spindle Center to Pillar: 650
mm, 680 mm |
| Three-Axis Ball Screw Dia.:
C3 P10 x 40 mm |
| SPINDLE |
| Spindle Taper: BT-40 |
| Spindle Speed: 8000 Optional
Devices:10000/12000 RPM |
| Feed
Rate |
| X/Y/Z Feed Speed: Depending
On Controller mm/min |
| X/Y/Z Guide-way: Linear / Slideway |
| X/Y/Z Quick Movement: 20 m/min |
Tool
Magazine
|
| X/Y/Z Quick Movement: 20 m/min |
| Max. Tool Dia. x Length: 100
x 75 mm, 100 x 75 mm |
| Max. Tool Weight: 6 kgs |
| Air Pressure: 6 kg/cm² |
| Motor |
| Spindle Motor: 5.5 KW(7.5HP),
7.5 KW(10HP) |
| Cooling System Motor: 1 HP |
| Power Supply: 25 KVA |
| Net Weight: 5800KGS, 6900KGS |
| Machine Dimensions (L x W x
H): 3000 x 2615 x 2535 mm, 3850 x 3200 x 2800 mm |
| |
| * All specifications and designs
are subject to change without prior notice. |
| |
))
